Results for "Vehicle Year: 2003"

Tags

  • I could not install the Walker converter. The original converter taken off the vehicle has two oxygen sensor ports. The 53451 and the 53717 only have one oxygen sensor port.

    Solution: Make sure the engine code is 1ZZ-FE. The Walker catalytic converters 53451 and 53717 will not fit engine code 2ZZ-GE. The 2ZZ-GE engine has two oxygen sensors in the catalytic converter assembly

    Tags: Position: Direct Fit Converter, Vehicle Year: 2003, Vehicle Model: Matrix, Part# 53451, Vehicle Make: Toyota, Topic Category: Removal and Installation, Part# 53717

    1743 days ago

  • My OE unit has a heat shield and the Walker unit does not. There is no way to re-use the OE heat shield.

    Solution: OE heat shield is not required on our unit (air gap pipe)

    Tags: Vehicle Year: 2003, Vehicle Model: Outback, Topic Category: Application, Vehicle Make: Subaru, Part# 54562

    1743 days ago

  • Quick Strut vs OESpectrum

    I have a 2003 Toyota Corolla and I am planning to replace a four shocks/struts.  Is the Quick Strut charged with nitrogen like the OESpectrum?  What are the mechanical or component differences  i.e. coil spring, top mount, bearing, upper seat, boot kit, seal, etc.   Doe...

    Tags: Vehicle Year: 2003, Vehicle Make: toyota, Topic Category: Product Features, Vehicle Model: corolla, Part# 172115, Part# 72115

    1678 days ago

  • Too tall for tower?

    I have installed the listed struts on my 2003 VW JettaTDI. Everything seemed great until I tried to tighten the nuts on the tower bolt. The metal cup is the exact same size and the OEM. However on the driver side it sticks up above the tower about 3/4" and on the passenger side it sticks up about...

    Tags: Tall tower, Vehicle Year: 2003, Vehicle Make: VW, Part# 171525, Topic Category: Removal and Installation, Vehicle Model: Jetta, Part# 801525, Part# 181525, Part# 71525

    1731 days ago

  • MA824MM Shocks

    Have just fitted two new air shocks MA824MM, installed new air line AK29.  Somewhere there is a leak!!  I fitted the air line directly onto the shock using the click spring, what are the two small pin like nylon plugs for, do they have to be fitted somewhere.  Where the line pushes...

    Tags: Vehicle Make: Chev, Vehicle Model: Venture, Topic Category: Removal and Installation, Vehicle Year: 2003, Part# AK29

    1678 days ago

  • isuzu axiom lift

    i have a 2003 izuzu axiom RWD . lifted 2.5 inches , need to replace shocks front and back , and would like a little better than oem . not worried about the elctrnic part. can you help what do you recomend

    Tags: Vehicle Model: axiom, Vehicle Make: isuzu, Part# 37159, Topic Category: Product Features, Vehicle Year: 2003, Part# 37160

    1669 days ago

  • Steel sleeve insert in upper bushing assembly

    My original front shocks had a metal sleeve in the upper bushing assembly.  Do I need to remove and reuse this sleeve?  It does not appear to be compatible with your bushings.

    Tags: Vehicle Year: 2003, Vehicle Make: Chevrolet, metal sleeve, 37151, Vehicle Model: Silverado 1500 4WD, Part# 911151, Part# 37151, Part# 911501, Part# 34677, Topic Category: Removal and Installation, Part# 32328

    1668 days ago

  • Quick Struts for 2003 Toyota Highlander AWD

    Apparently the only manufacturer that makes a complete, pre-compressed package with coil springs, for those of us without the equipment, is FCS? Does Monroe plan on making these in the future? I believe they would cross over to the Lexus rx300 as well... Thanks in advance!   On a side not...

    Tags: Vehicle Year: 2003, Vehicle Model: Highlander Limited AWD, Topic Category: Removal and Installation, Vehicle Make: Toyota, Part# 171493

    1667 days ago

  • Strut mount appears too shallow,

    Once assembled the strut stop plate (cup) does not tighten down. There is a 1/2" gap where the cup is too deep or the monroe mount is too shallow. These are new struts and new monroe strut mate mounts. image can be seen here http://imgur.com/a/FEJjj

    Tags: Vehicle Make: VW, Vehicle Year: 2003, Vehicle Model: GTI, Topic Category: Removal and Installation, Part# 904905, Part# 71525

    1596 days ago

  • Monroe MA822 Max-Air Air Shock Absorber

    Just received these from amazon. No instructions supplied, just shocks, washers and nuts. How do you extend the shocks to install them? Tried gently blowing compressed air ONTO the fitting, saw the air bladder start to swell, and stopped. Cant pull to extend. Help?

    Tags: Topic Category: Removal and Installation, Vehicle Model: LeSabre Custom, Vehicle Make: Buick, Vehicle Year: 2003, Part# MA822

    1492 days ago