Tech Talk

Latest activity

• • AlessioGolf3@AlessioGolf3

  

  AlessioGolf3 added a new discussion topic E1008 and part 17110987 in the group Reflex® - Monroe Shocks and Struts 11 days ago

  Dear Tenneco-Monroe Staff, I bought a new set of Monroe-Reflex E1008 from Germany and I received the package but I found the Monroe box inside has incomplete set of shock absorbers. Once opened the Monroe cardboard box I found two shock absorbers,...
• • AlessioGolf3@AlessioGolf3

  

  AlessioGolf3 joined the group Reflex® - Monroe Shocks and Struts 11 days ago
• • Strife622@strife622

  

  Strife622 added a new discussion topic Still incorrect shank length...... in the group Hardware and Accessories - Walker 61 days ago

  As stated by the other guy, the bolt shank is too long for my 2008 Subaru Legacy 2.5i Limited. The donut gasket they sell with their kit was also too small for my car, replace that as well. Just order OEM and be done with it. Correct part numbers...
• • Tenneco Tech Rep Trevor M@TrevorM

  

  Tenneco Tech Rep Trevor M replied on the discussion topic 2015 e450 RV in the group Gas-Magnum® - Monroe Shocks and Struts 61 days ago

  Hello, It is possible we may be able to find a shock that has the same mounts as this vehicle with a longer overall extended length.  To ensure we get you the correct unit with the correct measurements, I would recommend trying to call in to...
• • DAN@albertaspring

  

  DAN added a new discussion topic 2015 e450 RV in the group Gas-Magnum® - Monroe Shocks and Struts 62 days ago

  Good day, i am working on a 2015 e450 RV, we added extra leaves to the spring packs, now the shock is topped out. is there any longer shock available for this application? Thanks in advance for your feedback.
• • Tenneco Tech Rep Trevor M@TrevorM

  

  Tenneco Tech Rep Trevor M replied on the discussion topic Cat for Jeep CJ7 in the group OE-Style - Walker 69 days ago

  Hello, Unfortunately, Walker exhaust does not manufacture or offer a converter for this vehicle application or flange application anymore.  We apologize for any frustration or inconvenience that this may have caused. 
• • Jason@Avidjeeper

  

  Jason added a new discussion topic Cat for Jeep CJ7 in the group OE-Style - Walker 70 days ago

  I need a catalytic converter for my CJ7 with an AMC V8.  I have the walker Y pipe 40376 and cannot find a converter that will bolt up to the four bolt flange.  Is there a cat that will bolt up to your y pipe flange or a connector that will...
• • Jason@Avidjeeper

  

  Jason added a new discussion topic Cat for Jeep CJ7 in the group OE-Style - Walker 70 days ago

  I need a catalytic converter for my CJ7 with an AMC V8.  I have the walker Y pipe 40376 and cannot find a converter that will bolt up to the four bolt flange.  Is there a cat that will bolt up to your y pipe flange or a connector that will...
• • Tenneco Tech Rep Trevor M@TrevorM

  

  Tenneco Tech Rep Trevor M replied on the discussion topic Pipe improper length. in the group OE-Style - Walker 72 days ago

  Hello, We apologize for  this situation and have recently made an engineering change to this product to extend the length of this pipe for this situation.  
• • Jay Van@jayvan454

  

  Jay Van added a new discussion topic Pipe improper length. in the group OE-Style - Walker 74 days ago

  Pipe had to be extended a full inch to properly install on a 2006 Pontiac G6 with 2.4L engine. No other aftermarket parts played a factor. All OEM parts otherwise. Two walker pipes were attempted and both were incorrect. 
• • Jay Van@jayvan454

  

  Jay Van added a new discussion topic Pipe improper length. in the group OE-Style - Walker 74 days ago

  Pipe had to be extended a full inch to properly install on a 2006 Pontiac G6 with 2.4L engine. No other aftermarket parts played a factor. All OEM parts otherwise. Two walker pipes were attempted and both were incorrect. 
• • Jay Van@jayvan454

  

  Jay Van added a new discussion topic Pipe improper length. in the group OE-Style - Walker 74 days ago

  Pipe had to be extended a full inch to properly install on a 2006 Pontiac G6 with 2.4L engine. No other aftermarket parts played a factor. All OEM parts otherwise. Two walker pipes were attempted and both were incorrect. 
• • Tenneco Tech Rep Trevor M@TrevorM

  

  Tenneco Tech Rep Trevor M replied on the discussion topic Thumping sound in the group OESpectrum® - Monroe Shocks and Struts 74 days ago

  Hello, We currently have not seen any trending concerns related to noises on this shock in the past.  With that being said, it is possible the concern you are experiencing is related to a defective or faulty shock still.  In this...
• • yorker01@yorker01

  

  yorker01 added a new discussion topic Thumping sound in the group OESpectrum® - Monroe Shocks and Struts 75 days ago

  Two weeks ago I installed new shocks (37316) on my 2009 Honda Odyssey.  Yesterday a thumping sound started.  It occurs when going over bumps or uneven road.  The back end doesn't seem to have any give or bounce that is indicative of...
• • Tenneco Tech Rep Trevor M@TrevorM

  

  Tenneco Tech Rep Trevor M has a new avatar 76 days ago

  
• • Tenneco Tech Rep Trevor M@TrevorM

  

  Tenneco Tech Rep Trevor M replied on the discussion topic 2011 Hyundai Sonata Limited in the group OESpectrum® - Monroe Shocks and Struts 76 days ago

  Hello, In this situation, the concern you are experiencing is related to your vehicle having the Factory Pro Kit option from the factory. Hyundai worked together with Eibach to develop a suspension package exclusive to that year vehicle. ...
• • Tenneco Tech Rep Trevor M@TrevorM

  

  Tenneco Tech Rep Trevor M replied on the discussion topic Muffler Direction in the group Quiet-Flow® SS - Walker 76 days ago

  Hello, Typically when the muffler has the word inlet and an arrow on it, the arrow is pointing toward the inlet.  With that being said, this muffler is designed and manufactured to be installed with the offset side as the inlet and the...
• • Tenneco Tech Rep Trevor M@TrevorM

  

  Tenneco Tech Rep Trevor M replied on the discussion topic Pipe Sizes in the group Ultra® EPA Catalytic Converters - Walker 76 days ago

  Hello, The pipe measures 2 inch outside diameter before and after the catalytic converters on our pipes and the O2 sensor port is M18x1.5 accordingly. 
• • Tenneco Tech Rep Trevor M@TrevorM

  

  Tenneco Tech Rep Trevor M replied on the discussion topic Pipe Sizes in the group Ultra® EPA Catalytic Converters - Walker 76 days ago

  Hello, The pipe measures 2 inch outside diameter before and after the catalytic converters on our pipes and the O2 sensor port is M18x1.5 accordingly. 
• • Tenneco Tech Rep Trevor M@TrevorM

  

  Tenneco Tech Rep Trevor M replied on the discussion topic Pipe Sizes in the group Ultra® EPA Catalytic Converters - Walker 76 days ago

  Hello, The pipe measures 2 inch outside diameter before and after the catalytic converters on our pipes and the O2 sensor port is M18x1.5 accordingly. 

• « Previous
• 1
• 2
• 3
• 4
• 5
• 6
• Next »